Now,Auto show tentThe use of more and more widely, its convenience is sought after by people, which is also in line with the modern fast-paced lifestyle. How is something this big assembled?

Exterior Shed Step:

1. According to the specifications of the auto show tent layout site lofting and fixed foundation layout. All bases must be on a horizontal surface. If the ground is uneven, fill it in first.

2. According to the connection relationship and construction position of each component, place the material and place each component in the appropriate position.

3. Assemble the frame 1 Install the ridge connection angle and inclined beam 2 Install the load-bearing column and inclined beam 3 Install the load-bearing column and base.

4. The vertical frame is correctly and safely connected to the inclined beam by the crane.

5. Connect the transverse support rod to the base and lock it with a cylindrical pin and a cotter pin.

6. Install the square ridge and square tube, hang one end of the square ridge tube hook on the U-shaped button corresponding to the frame, and the other end can also be used.

7. Install the roof square pipe.

8. Install gable jamb center post.

9. Install the suspension pipes on the left and right sides.

10. Adjust the position and fixation of the side column foot.

11. Install the roof cable.

12. Install the tarpaulin.

13. Pass through the side wall and place the tie rod under the gable tarpaulin.

14. After passing the comprehensive inspection, complete the installation of the exhibition tent.

Auto show tent construction pay attention to matters:

Check whether all parts are in good condition before installation, and non-construction personnel should be away from the installation site during installation.

1. Before using the auto show tent, measure the site and determine the specifications of the auto show tent.

2. The tent of the auto show shall be assembled and built by professionals, and non-professionals shall not assemble and build by themselves;

3. According to the construction site to determine the exhibition tent fixed way (expansion screw fixed, anchor screw fixed, bearing plate attached weight fixed).

The number of construction personnel and construction plan shall be determined according to the construction time, scale and site factors of the work shed. Each construction foreman shall be responsible for all matters during the construction period and carry out the construction as planned. During the construction period, the construction personnel of the car show tent should strictly wear safety helmet, safety protective clothing and protective shoes. Reasonably arrange the work and rest time of construction personnel and various safety measures to ensure the safety and stability of the construction of the tent of the auto show. During the construction of the aluminum alloy auto show tent, other personnel are prohibited from entering and leaving the construction site of the aluminum alloy auto show tent.

Generally speaking, the span of the car show fleet directly affects the difficulty of scaffolding, and the difficulty of scaffolding is closely related to the construction time of scaffolding. The utility model can directly reach the construction site. Calculated by using expansion screws, the main construction time of the 10000 square meter auto show tent is shown in the following table:

The total working time of the scaffold span is calculated as 10 people, 8 hours of work and the required time. The span of 3-10 meters is about 30 hours and 3 days. The span of 12-25m is about 40 man-hours for 4 days. The aluminum alloy auto show tent has become the new favorite of the auto show because of its high cost, fast erection speed and good safety.